Model No.: FST- RP-0060D010BH4HC
0060D010BH4HC filter element is a small flow micro filter element of hydac Company. It is the best choice for preventing accidental shutdown and prolonging the oil life of hydraulic system. High efficiency Fiberglass ensures that the capture efficiency of hydraulic filter reaches 99.9 and can withstand the highest pressure collapsing strength 210 bar. It has a high filtration ratio and a high value of stability, and the high value is almost unchanged in the range of rated pressure.
Characteristics and advantages:
With reasonable combination, the filtration effect is better, high pressure collapsibility and high circulation. The filter element of 0060d010bn3hc series instead of hydac has the same size and can completely replace the original product and achieve the original filter effect. In the oil circuit of hydraulic system, metal powder and other mechanical impurities which are used to remove wear and tear of components in hydraulic system are used to keep the oil path clean, and the life of hydraulic system can be prolonged.
Filter element type
High efficiency folding filter
Resin consolidated glass fiber high efficiency filter material mixed with Wire mesh
Glass fiber filter material
1, 3, 5, 5, 7, 10, 12, 22 microns available
Internal support and end cover material
Metallized tin / reinforced nylon / stainless steel
The main contents are as follows:
(1) A new filter material is made for the filter element. The multi-layer filtration structure ensures the ability of separation of high contamination and dirty pollution, uniform texture, corrosion resistance and fatigue resistance.
(2) Innovating longitudinal joint technology and perfectly joining the end of filter material, especially under different loads, the effective value can prevent suspended particles from entering the filter zone from the dirt area.
(3) In the operation of filter element, the static electricity can be derived below the safe value, and the continuous formation of black carbon or the formation of silt oil can be excluded.
(4) The original imported filter media has uniform aperture, low resistance and large dust capacity.
(5) Germany imported composite filter folding machine to increase the effective filter area.
(6) Oil and temperature resistant cyclopropyl resin adhesive. The seal is firm.
(7) Thickened steel plate skeleton. Strong pressure drop resistance.
(8) To leave the factory after passing the inspection. The quality is reliable.
1.Metallurgy : used for filtration of rolling mill, continuous casting machine hydraulic system and various lubricating equipment.
2. Petrochemical: separation and recovery of products and intermediate products in refining and chemical production, filtration of oil well water and natural gas.
3.Thermal power and nuclear power: gas turbine, boiler lubrication system, speed control system, bypass control system oil purification, feed water pump, fan and dust removal system purification.
4. All kinds of lifting, handling operations: lifting, loading and other engineering machinery to fire, maintenance, handling and other special vehicles, ship crane, anchor, blast furnace, steelmaking equipment, lock, ship door hoist, The lift-down pool and stage of the theatre, all kinds of automatic transmission lines, etc.
ISO2491 filter-rupture resistance experiment:
The test of resistance to rupture of filter element belongs to the strength test of the filter element itself. The filter element is generally subjected to external force by the pressure difference limit after carrying the dirt in the filter shell. The inner skeleton is the main support of the filter layer under the limit pressure difference of the filter element, and the collapse of the skeleton will lead to the collapse of the filter layer.
ISO2492 filter element structural integrity experiment:
The significance of the requirement of the integrity of the filter element structure, the filter material is very good, the filter material is broken or made incomplete in the process of making the filter element, the incomplete phenomenon mainly manifests in: the filter material is damaged, the end cover is not glued strictly, the filter material butt joint is not strict and solid. It will greatly affect the original filtering accuracy.
ISO2493 filter element the compatibility betwee material and liquid experiment:
The compatibility test between filter element and working fluid is mainly a validation test of the properties of raw materials used in the process of making filter elements, such as compatibility with petroleum, water diol, water-oil emulsion and liquid with high water content. PTFE seals are standard configurations and can be used in conjunction with industrial phosphate, diesters and specific synthetic materials.
ISO3726 filter element experimental method of the end load:
The end load test of the filter element mainly tests the ability of bearing the axial mounting force, the strength, the axial load, the flattening strength and so on.
ISO3724 filter element the determination of fatigue characteristics:
The test of the fatigue characteristics of the filter element is the test of the life of the filter element. The filter element works in the hydraulic system, withstanding the reciprocating and alternating fluid flow of the system and the pressure impact of the working flow. Under this impact, if the filter element has accumulated pollutants and established a greater pressure difference, then the pressure of the filter layer withstanding the fluid flow will be greater.
ISO3968 filter element determination of flow characteristics and the pressure difference:
The pressure drop flow characteristic is usually an assessment of the filter, but in fact, it mainly evaluates the flow rate and resistance of the filter core. Of course, in the design of filter assembly, there are flow and bypass problems in the channel design of the shell. But after all, it is not the main problem, the main problem is the filter, so the standard mainly checks the filter, not the filter.The replacement of HYDAC company hydraulic filter type Series: (FST- RP-xxxxxxxx)
Henan Sinofiltec Technology Co.,Ltd
Sinofiltec technology Co.,Ltd has the perfect testing equipment and quality assurance system, has passed the ISO9001-2008 quality system certification. our products are widely used in aerospace navigation, petroleum and petrochemical industry, oil and gas drilling industry, energy and power industry, iron and steel metallurgy industry, biomedicine industry, textile & chemical fiber industry and military equipments and other fields.
We offer the high quality filters and filtration projects for the global customers to save the expensive operating cost.
Sinofiltec technology Co.,Ltd would like to communicate and cooperate with customers widely at home and abroad, and truly to creat more value for our customers, truly to achieve the best use of things and the value for money !
- Company Name: Henan Sinofiltec Technology Co.,Ltd
- Representative: Jia rui qing
- Product/Service: Filter Medium , Wedge Wire Filter Elements , Filter Assemblies , Hydraulic Filters , Sintered Wire Mesh , Water Filters
- Capital (Million US $): 5000000RMB
- Year Established: 2018
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 30,000-50,000 square meters
- Factory Location: Xiyi street, No.2 indutrial park of the high & new industrial development zone
- Contact Person: Mr. Keven Jia
- Tel: 86-373-7039618
Premium Related Products